|
Новости в мире бритья Обсуждаем интересные события: новости, анонсы, рекламные акции и др. |
|
Опции темы | Опции просмотра |
#121
|
||||
|
||||
что-то слышно? Когда Гаррет начнет рассылку?
|
#122
|
|||
|
|||
June Update - New Production & Chroming
New Production and Assembly Initial production and assembly has been extraordinarily successful as you can see from the fit and finish of the parts in the below pictures. I want to pull particular attention to the fantastic results that are being produced on the production chroming - I'm confident this chroming quality will exceed all your expectations. The thick, durable chroming is a result of the optimizing of materials for each part, and our internal stress testing indicates this chroming can be expected to last generations - we think you’ll be thrilled with the results! The above pictures are of the White Chrome finish. We'll be sharing additional pictures of Brushed Chrome and Gunmetal finishes as soon as possible! Assembly is one of the more important parts of the Model T production. We've learned that even if part production is executed perfectly, variance and slight error in assembly can result in performance issues with the razor. The solution to this is to take additional care and quality control steps in assembly. Rockwell Razors is committed to producing incredible quality no matter what and providing exceptional customer care, and we will be upholding that standard as we work on the assembly of the Model T. With that said, we'll provide an update with more precise shipping dates in our update toward the end of July. Thank you for your support! Stainless Steel Model T As some of you may know, we were exploring the option to manufacture an alternative version of the Model T out of stainless steel using metal injection molding (MIM) for a small subset of backers that were interested in that option. After rigorous exploration and testing of options by our engineers and manufacturers both domestic and abroad, we weren’t able to find any solutions to manufacture using MIM that would meet our quality and performance targets. We’re investigating some options apart from MIM that would work to produce a Stainless Steel Model T for those backers interested and we’ll provide more information on that next month. If you have any specific questions about the Stainless Steel Model T, please direct them to info@rockwellrazors.com so that the discussion on the comments remains focused on the Model T product currently in production. ~~~ Thank you for having our back! Please reach out to us at info@rockwellrazors.com if you have any questions about production before the next update on July 28th. Gareth Co-Founder, Rockwell Razors Что в переводе на русский примерно означает, что в конце июля начнут рассылать. НО лишь якобы маленький процент покупателей на самом деле хотели полностью стальную версию (ааа, а пацаны то не знали) и вот со стальной версией проблемы, с какой-то мелкой деталью. Мне так, вообще не стальной целиком даром не нужен и я переключил внимание на http://www.razoremporium.com/rex-sup...teel-de-razor/ Ну то есть придёт и придёт, если полностью стальной не будет, то доплачивать не буду и попрошу вернуть деньги. Если они решат проблему, то доплачу, такой план. --------- ДОБАВЛЕНО ЧЕРЕЗ 4 МИНУТЫ --------- В течении месяца обещают информацию по стали. --------- ДОБАВЛЕНО ЧЕРЕЗ 31 МИНУТУ --------- Я сейчас изучаю [URL="https://www.indiegogo.com/projects/rockwell-model-t-razor-blades-shaving-perfected-design-technology/x/16101949#/comments[/URL], может я не очень пока понял, но это всё грустно. Нет никакой стальной полностью версии, есть только possible stainless steel model которая где-то там, в светлом капиталистическом будущем. Может я неправильно понимаю, но это отстой) Поправьте меня если я неправ и бритва должны быть стальной, но вот так вышло, что она не стальная. |
#123
|
|||
|
|||
Стоит отдать должное, не было речи в видео о стальной версии в прошлом, так почему я ждал стальную версию уже и не пойму сам. Может и правда, всё это было сном...
Последний раз редактировалось Blackoff; 27.11.2023 в 00:07. |
#124
|
|||
|
|||
Немного прояснилось
Первая рассылка через четыре-пять недель, первые 500, полностью бекерам закончат рассылку в октябре или ноябре. Сейчас каждую бритву проверяют вручную на покрытие, функциональность. По поводу стальной версии model-t, что есть проблемы и вкратце, что стальная версия будет запущена отдельной кампанией (эта музыка будет вечной) в которой они предложат КОЛОССАЛЬНУЮ скидку для бекеров предыдущей кампании. |
#125
|
||||
|
||||
небольшая новость!
Dear Backers, Thank you for your patience for this (slightly late) September Update. We’ve been focused on assembling as many Model T’s as possible while maintaining a detailed and open dialogue with our engineering teams, both in Toronto and at the manufacturing / assembly facilities. At this point in the process, we’re confident that we’re doing everything we can to assemble perfect Model T razors as quickly as possible. Despite not yet being ramped up to the speed we’re aiming for, we’ve seen some very encouraging progress. This update won’t be particularly visual (we’ll have plenty of great videos / pictures to share at the end of the month), but we wanted to keep backers appraised on our progress! We’re now expecting to have the first round of razors shipped out by the end of October. To help increase production, we’re currently even in the process of manufacturing our own additional jigs to pair with additional assembly machines that we’ve purchased! Finally, while I (Gareth) was unfortunately not able to attend the MenEssentials Meetup in Toronto back in September, Grigori (Rockwell’s customer service / web guru) and a Model T both attended the event. All the feedback on the fit, function, and appearance of the razor at the meetup was exclusively extremely positive and encouraging. Any Toronto-based backers who attended the event: please feel free to share your thoughts on the Model T in the comments of this update! Thank you again for continuing have our back, and please reach out to us at info@rockwellrazors.com if you have any questions about production before the next update in late October! Gareth Co-Founder, Rockwell Razors Перевод |
#126
|
|||
|
|||
Письмо с новостями и фотками, из фабрики в Канаде
Gunmetal О сроках отправки в этот раз ничего не написал конкретно, просто "Контроль качества к концу месяца, благодарим за терпение" |
#127
|
|||
|
|||
кхе кхе, будет ли он лучше футура работать)?
|
#128
|
||||
|
||||
Цитата:
|
#129
|
|||
|
|||
Видимо, одним из существенных условий была низкая себестоимость:-(
|
#130
|
|||
|
|||
А ведь стырят, рано или поздно, если китайцы.
|
Здесь присутствуют: 1 (пользователей: 0 , гостей: 1) | |
|
|
Похожие темы | ||||
Тема | Автор | Раздел | Ответов | Последнее сообщение |
Rockwell Razor 6S | Freelancer | Обзоры станков | 8 | 10.04.2021 18:46 |
Rockwell Razor 6S | Freelancer | Станки с двухсторонними лезвиями (double-edge) | 1001 | 20.04.2016 14:38 |
По вопросам размещения рекламы на форуме обращайтесь по адресу/To advertise on the forum please contact us at: myshaveruforum@gmail.com